CNTR-RGBW-DALI

DALI CONVERTER - 4 CHANNELS PWM - DIMMER - DIMMER CCT - RGB - RGBW - CONSTANT VOLTAGE OUTPUTS PWM 12-24-36VDC - 4 X 5A
65.90€
Qty:
DESCRIPTION:
The CNTR-RGBW-DALI control unit is a multifunction converter from DALI 4-channel protocol that can be configured in synchro or independent with PWM constant voltage outputs. Manages and maximizes the performance of the dimmable 1 channel system (1CH), dimmable CCT (2CH), system RGB (3CH) or RGBW (4CH). CNTR-RGBW-DALI can control the dimmable monochromatic LED, CCT, RGB and RGBW strips and spotlights in addition to any luminaire with PWM 12-24-36VDC control inputs. It is compatible with a wide range of elegant remote controls and wall panels on 502 and 503 recessed box and other control systems compatible with Dali home automation. Depending on the configuration, the control unit is equipped with both brightness (dimmer), temperature and RGBW colour adjustment functions with 256 steps per channel from 0.1 to 100% of the power. High-frequency PWM dimming to avoid flickering effect when dimming or selecting colours. Dynamic white function (in CCT and RGBW dimmer systems). The zones or groups can be controlled separately or in sync with the possibility of combining up to 64 devices in the DALI domotic network, either in line, star or tree configuration. The system can address a maximum of 64 receivers per line and each DALI utility, each receiver or signal converter can be assigned to 16 freely definable groups and can store up to 16 lighting values within it. Important: the individual devices can be connected anywhere on the BUS cable, on any level of connection, ie on any type of line. Compatible with DALI / Wi-Fi converters with the possibility to control the systems through applications for smartphones or tablets with IOs, Android, Windows and the major software producers.

USE:
Switch on, switch off, dim and integrate to the smart home, LED strips, recessed spotlights, ceiling lights, underground lights, projectors, and other monochromatic lighting fixtures, CCT or RGB and RGBW PWM technology. Each zone can work in sync or separately and managed by one or more single or multi-zone radio controls, touch wall panels on 502 or 503 recessed boxes, wall-mounted display or by simple switches and mechanical buttons. Design, installation, and configuration of Dali system must be performed by specialized technical personnel. Communication signal takes place through 2-pole wiring (Dali communication BUS) and careful design of the electrical system is mandatory. Has an integrative and complete solution for the automated control of different devices such as lighting, burglar alarm system, video surveillance, multimedia system, heating control, temperature sensors, humidity, smoke etc. Suitable for the control of medium and large areas, such as large houses, factories, hotels, spas, offices, shops, clubs, pubs, gardens, with maximum distances between the various electronics of 300 meters. Dali protocol integrates with millions of smart-home compatible electronics.

TECHNICAL SPECIFICATIONS:
Code: CNTR-RGBW-DALI
Type: Dali converter + dimmer + CCT + RGB + RGBW dimmer with 4 PWM outputs controlled in sync or separately on constant voltage 12-24-36VDC
Dimensions: 178mm x 46mm x H 22mm
Technology: dimmer (4CH), dimmer CCT (2 + 2CH), RGB (3CH), RGBW (4CH) + dynamic white function
Dali channels: from 1 to 4 settable
Command zones: 1 zone
Voltage: 12-24-36VDC
Power: 240 watt @12VDC - 480 watt @24VDC - 720 watt @36VDC
PWM outputs: 4 x 5A (dimm) - 4 x 5A (dimm CCT) - 4 x 5A (RGBW)
Signal type: digital Dali protocol IEC 62386-102 IEC 62386-207
Range signal: 300 meters
Brightness fine adjustment: 4 channels (dimm) with 256 levels / channel adjustment
Dimmer: yes, general and settable on each zone from 0,1 to 100%
Multi-compatibility: radio controls, wall panels, switches and mechanical buttons, Wi-fi module and DALI compatible electronics
Product finish: ABS
Protection: IP20
Warranty: 2 years
Certification: CE - RoHS - FCC - UL - TUV - NOM
Various:

  • RGBW colors (total> 4 billion colors) - CCT dimmer (total 65,000 levels) - dimmer (total 256 levels).
  • Dynamic white function (total 50 million levels - depending on the configuration, wall panel or radio control used).
  • Turning on, off and independent dimmer adjustment for each of the 4 channels R - G - B - W (256 levels).
  • White is controlled by the 'W' channel and also by the sum 'R + G + B' (the white tone is also controlled in RGB systems).
  • Dali channels adjustable from 1 to 4, the outputs can work in sync or separately.
  • Fast and precise chromatic adjustment according to the configuration.
  • Optimization of energy consumption thanks to high precision dimming.
  • Available in DIN rail format.
Note: Installation and configuration of the product are exclusive by qualified technical personnel.

DIMENSIONS:

 photo dimensioni cntr rgbw dali_zpsajiqgitf.jpg

CONNECTION:

 photo CNTR-RGBW-DALI centralina dimmer rgbw dali pwm 4 canali per strisce LED_zpsxvliexpp.jpg
Note: Connection:
  • Connect 1-2-3-4 in RGBW systems (1 = R, 2 = B, 3 = G, 4 = W).
  • Connect 1-2-3 in RGB systems (1 = R, 2 = B, 3 = G).
  • Connect 1-2-3-4 in CCT systems (1 = CW, 2 = WW, 3 = CW, 4 = WW).
  • Connect 1-2-3-4 in DIMM systems (1 = DIMM, 2 = DIMM, 3 = DIMM, 4 = DIMM).

FEATURES:

DALI ADDRESS SETTING:
  1. Press and hold either button until the digital numeric display starts to flash.
  2. Quickly click one of the two buttons to select a digit, quickly click the button to change the digit to set the desired Dali address. The first button sets the tens (0 - 6), the second button the units (0 - 9). The set address can be (00 - 63).
  3. To confirm the setting, press and hold either button until the digital numeric display stops flashing.

Note: Dali address is assigned manually. To restore the factory values (no Dali address), set the "FF" digit.

DALI CHANNEL NUMBER SETTING:
  1. Press and hold both buttons until the digital numeric display starts to flash.
  2. Quickly click the first button to select "1A" (which means 1 Dali address), or "2A" (2 Dali addresses), or "3A" (3 Dali addresses), or "4A" (4 Dali addresses).
  3. To confirm the setting, press and hold either button until the digital numeric display stops flashing.

Note: as an example, when Dali address is set to 22:
  1. When "1A" is selected, all four output channels will have the same address 22. Suitable for a Dimm system with the four channels working in sync.
  2. When "2A" is selected, channels 1 and 3 will have the same address 22, channels 2 and 4 will have the same address 23. Indicated for a CCT system.
  3. When "3A" is selected, channel 1, 2, 3 will have the address 22, 23, 24 respectively, and the address of channel 4 is also 24. Indicated for an RGB system.
  4. When "4A" is selected, channel 1, 2, 3, 4 will have the address 22, 23, 24, 25 respectively. Indicated for an RGBW system. It can also be used in Dimm systems with the four channels that work separately.

DALI ADDRESS ASSIGNMENT FROM MASTER DALI:

Dali address can also be assigned automatically by the Master DALI controller referred to the DALI master’s user manuals compatible for specific operations.

Note: digital display will show the letter "AU" when the master assigns a Dali addresses to the receiver/converter.

EXAMPLE CONNECTION SYSTEM WITH 4X5 AMP OF MONOCHROME STRIP LED CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:
 photo dali schema collegamento dimmer strisce led bianche domotica casa intelligente connection strip white smart home diagrama co_zpslokpu9yz.jpg

EXAMPLE OF CONNECTION SYSTEM WITH 4X5 AMP OF CCT STRIP LED CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:

 photo dali schema collegamento dimmer strisce led bianco dinamico domotica casa intelligente  connection strip dynamic white smart_zpshu0dykhn.jpg

EXAMPLE OF CONNECTION SYSTEM WITH 3X5 AMP OF RGB STRIP LED CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:
 photo dali schema collegamento dimmer strisce led RGB domotica casa intelligente connection strip white smart home diagrama conexi_zpsfdc4xbnt.jpg

EXAMPLE OF CONNECTION SYSTEM WITH 4X5 AMP OF RGBW STRIP LED CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:
 photo dali schema collegamento dimmer strisce led RGBW domotica casa intelligente connection strip white smart home diagrama conex_zps31dbvymt.jpg

EXAMPLE OF CONNECTION SYSTEM WITH MONOCHROMATIC LED LAMPS CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:

 photo dali schema collegamento dimmer faretti led bianchi domotica casa intelligente connection ceiling light white smart home dia_zpstg4vbtes.jpg

EXAMPLE OF CONNECTION SYSTEM WITH CCT LED LAMPS CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:

 photo dali schema collegamento dimmer faretti led bianco dinamico domotica casa intelligente connection ceiling light white smart _zpsdcfoexaz.jpg

EXAMPLE OF CONNECTION SYSTEM WITH RGB LED LAMPS CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:

 photo dali schema collegamento dimmer faretti led RGB  domotica casa intelligente connection ceiling light multi color smart home _zpsyukkaun1.jpg

EXAMPLE OF CONNECTION SYSTEM WITH RGBW LED LAMPS CONTROLLED BY DALI IN PWM AND CONSTANT VOLTAGE:

 photo dali schema collegamento dimmer faretti led RGBW  domotica casa intelligente connection ceiling light multi color smart home_zpszwjbaeql.jpg

EXAMPLE OF CONNECTION SYSTEM WITH MONOCHROMATIC STRIPS LED CONTROLLED BY REMOTE CONTROL + DALI PUSH DIMMER AND PWM OUTPUT IN CONSTANT VOLTAGE:
 photo dali schema collegamento dimmer strisce led bianche domotica casa intelligente connection strip white smart home diagrama co_zpsk7rnzgmx.jpg

EXAMPLE OF CONNECTION SYSTEM WITH CCT STRIPS LED CONTROLLED BY REMOTE CONTROL + DALI PUSH DIMMER AND PWM OUTPUT IN CONSTANT VOLTAGE:
 photo dali schema collegamento dimmer strisce led bianco dinamico domotica casa intelligente  connection strip dynamic white smart_zps0f8pxp58.jpg

EXAMPLE OF CONNECTION SYSTEM WITH RGB STRIPS LED CONTROLLED BY REMOTE CONTROL + DALI PUSH DIMMER AND PWM OUTPUT IN CONSTANT VOLTAGE:
 photo dali schema collegamento dimmer strisce led RGB domotica casa intelligente connection strip white smart home diagrama conexi_zpsx7g4lv3i.jpg

EXAMPLE OF CONNECTION SYSTEM WITH RGBW STRIPS LED CONTROLLED BY REMOTE CONTROL + DALI PUSH DIMMER AND PWM OUTPUT IN CONSTANT VOLTAGE:
 photo dali schema collegamento dimmer strisce led RGBW domotica casa intelligente connection strip white smart home diagrama conex_zpscbjfpvkl.jpg

MANUALE TECNICO:
 photo CNTR-RGBW-DALI Dali dimmer comando strisce LED bianche dinamico variabile RGBW multicolore domotica casa intelligente_zps6hnewldr.jpg
  • Availability: 48 In Stock
  • Model: CNTR-RGBW-DALI

Write Review

Note: Do not use HTML in the text.